Simulation of cycloidal forming process at polyhedra production

Authors: Sizykh E.O.
Published in issue: #1(1)/2016
DOI: 10.18698/2541-8009-2016-1-1
Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing
Keywords: simulation, cycloidal forming, polyhedra
Published: 06.09.2016

The study tested the promising trends in developing highly efficient methods for forming the faceted surfaces of the parts. In our research we determined the stages of simulation of cycloidal forming process of the parts whose cross section is in the form of regular polygons.

References

[1] Charnko D.V., Timchenko A.I. Polygon shaft and sleeve joint in machine engineering. Vestnik mashinostroeniya, 1981, no. 1, pp. 33-35 (in Russ.).

[2] Danilov V.A., Danilov A.A. Analysis and realization of methods of shaping non-circular surfaces of profiled torque transmitting connection. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya B. Promyshlennost’, prikladnye nauki [The Vestnik of PSU. Ser. B.], 2014, no. 11, pp. 8-15 (in Russ.).

[3] Razumov M.S., Sokolov E.V., Klimova G.N. Rasshirenie oblasti ispol’zovaniya mnogogrannikov. [Widening field of application for polygons] Obespechenie kachestva produktsii na etapakh konstruktorskoy i tekhnologicheskoy podgotovki proizvodstva. Mezhvuzovskiy sb. nauch. trudov [Product quality assurance at stages of preproduction designing and engineering. Interuniversity proc.]. Voronezh, Voronezh STU Publ., 2012, no. 10, pp. 51-59 (in Russ.).

[4] Bobylev M.V., Stolyarov V.P., Zakirov D.M. Sovremennye podkhody k proizvodstvu vysokoprochnogo krepezha. Metallosnabzhenie i sbyt, 2000, no. 5, pp. 17-21 (in Russ.).

[5] Ivanov V.S. Cycloidal forming process simulation at revolving surface cut. Tekhnologiya mashinostroeniya, 2007, no. 7, pp. 19-23 (in Russ.).

[6] Ivanov D.V. Simulation of forming process of discrete-slot structure in case of bi-rotatory edge cutting machining. Nauka i obrazovanie. MGTU im. N.E. Baumana [Science and Education of Bauman MSTU], 2013, no. 7, pp. 345-366 (in Russ.). DOI: 10.7463/0713.0576656

[7] Ivanov V.S., Ivanov D.V. Investigation of the chink formation on the tubular shape at rotating edge tool-type work according to the path characteristics of generation of geometry. Tekhnologiya mashinostroeniya, 2009, no. 2, pp. 21-25 (in Russ.).