Determining the roughness amplitude formed by ball burnishing

Authors: Novichkov A.A.
Published in issue: #5(10)/2017
DOI: 10.18698/2541-8009-2017-5-99
Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing
Keywords: burnishing, numerical experiment, resulting surface roughness, regression coefficient
Published: 26.04.2017

We consider a way of computationally determining the roughness amplitude formed by ball burnishing in a numerical experiment. We do not have to measure the roughness of the part directly during the numerical experiment; we performed the computations using a theoretical equation, then encoded the input data and prepared a matrix. We present an empirical equation based on the results obtained, which shows the relation between the parameters under study.

References

[1] Suslov A.G., ed. Tekhnologiya i instrumenty otdelochno-uprochnyayushchey obrabotki detaley poverkhnostnym plasticheskim deformirovaniem. T.1 [Technology and instruments for finishing strengthening parts treatment by means of surface plastic deformation. Vol. 1]. Moscow, Mashinostroenie, 2014. 480 p. (in Russ.)

[2] Suslov A.G., Braun E.D., Vitkevich N.A. Kachestvo mashin. T.1 [Machines quality. Vol. 1]. Moscow, Mashinostroenie Publ., 1995. 256 p. (in Russ.)

[3] Dal’skiy A.M., Kosilova A.G., Meshcheryakov R.K., Suslov A.G., eds. Spravochnik tekhnologa-mashinostroitelya. T. 1 [Handbook of mechanic engineer technologist. Vol. 1]. Moscow, Mashinostroenie Publ., 2001. 912 p. (in Russ.)

[4] Shneyder Yu.G. Ekspluatatsionnye svoystva detaley s regulyarnym mikrorel’yefom [Serviceability of the parts with regular micro-relief]. Seriya «Vydayushchiesya uchenye ITMO» [Ser. Outstanding ITMO scientists]. Sankt-Petersburg, SPb GITMO Publ., 2001. 264 p. (in Russ.)

[5] Suslov A.G., Dal’skiy A.M. Nauchnye osnovy tekhnologii mashinostroeniya [Scientific basis of mechanical-engineering technology]. Moscow, Mashinostroenie, 2002. 684 p. (in Russ.)

[6] Papshev D.D. Otdelochno-uprochnyayushchaya obrabotka poverkhnostnym plasticheskim deformirovaniem [Finishing strengthening treatment by surface plastic deformation]. Moscow, Mashinostroenie Publ., 1978. 152 p. (in Russ.)

[7] Suslov A.G. Kachestvo poverkhnostnogo sloya detaley mashin [Facial layer quality of machinery parts]. Moscow, Mashinostroenie Publ., 2000. 319 p. (in Russ.)