Review of the bimetallic materials manufacture methods

Authors: Yanko M.A., Devyatchenok A.V.
Published in issue: #3(98)/2025
DOI:
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys
Keywords: bimetallic materials, combined casting, pack rolling, explosion cladding, cold rolling welding, bimetal pressing, drawing
Published: 29.06.2025

The paper presents a review of main methods in the bimetallic materials manufacture in the modern industrial production. It presents and analyzes a group of bimetals according to their application area. The paper also provides a detailed description of the main methods in the bimetals manufacture, including combined casting, pack rolling, explosion cladding, cold rolling welding, bimetal pressing, and drawing. Their advantages and disadvantages are comparatively analyzed. The technique for bimetals manufacture by combining the main methods, namely, explosion welding together with the cold rolling making it possible to obtain a product with high strength and a defect-free structure is considered as the promising and most common method.

References

[1] Berdychenko A.A. Methods of obtaining steel-titanium bimetal. Historical overview. Polozunovskiy vestnik, 2017, no. 4, pp. 129–137. (In Russ.).

[2] Golovanenko S.A., Meandrov L.V. Production of bimetals. Moscow, Metallurgy Publ., 1966, pp. 8–56. (In Russ.).

[3] Sirotenko L.D., Shlykov E.S., Ablyaz T.R. Application of bimetallic materials in mechanical engineering. Modern Problems of Science and Education, 2015, no. 2–1, 163 p. (In Russ.).

[4] Yashkin V.A., Stepanov N.V., Zakhariyashev V.V. and others. The method of applying a protective anti-corrosion zinc coating to a metal surface. Patent no. 2495362 C1 of the Russian Federation, IPC F42B 5/26, 2013. (In Russ.).

[5] Gavryushin S.S., Nikolaeva A.S. Thermosensitive actuator. Patent no. 159005 U1 of the Russian Federation, IPC H01H 37/54, 2015. (In Russ.).

[6] Andreev A.V. Bimetallic wire. Patent no. 185093 U1 of the Russian Federation, IPC B23K 35/12, 2018. (In Russ.).

[7] Makovsky V.A., Yeilman L.S. Bimetallic rods. Moscow, Metallurgy Publ., 1981, 180 p. (In Russ.).

[8] Pluzhnikov Yu.V., Kolmakov A.V., Bastrykin V.V., Lavrentiev A.P. A method for manufacturing bimetal with an aluminum-based antifriction alloy for sliding bearing liners. Patent no. 2377107 C2 of the Russian Federation, IPC B23K 20/04, 2009. (In Russ.).

[9] Mironov S.Y. Modern technologies of applying protective coatings. Student spring 2013. Engineering technologies. Vseros. nauch.-tech. Conference: Moscow, BMSTU Press, state registration no. 0321300796. URL: studvesna.qform3d.ru ?go=articles&id=798 (accessed 18.09.2024)

[10] Lekhov O.S., Turlaev V.V., Lisin I.V., Tuev M.Yu. Investigation of the combined continuous casting and deformation process for the production of bimetallic strips. Bulletin of the Moscow State Technical University named after G.I. Nosov, 2014, no. 4 (48), pp. 69–73. (In Russ.).

[11] Shishkin T.A., Pervukhina O.L., Nikolaenko P.A. Peculiarities of bimetal production and destruction from tool and high-strength steels obtained by combining explosion welding and hot batch rolling methods. Bulletin of TSU, 2013, vol. 18, iss. 4, pp. 1897–1898. (In Russ.).

[12] Shishkin T.A., Pervukhina O.L., Pervukhin L.B. Combined method of bimetal production (explosion welding and hot batch rolling). Scientific and technological progress in ferrous metallurgy. II International Scientific and Technical conf.: mater. Cherepovets, Cherepovets State University Publ., 2015, 152 p. (In Russ.).

[13] Stepanov A.P. The experience of rolling bimetallic steel sheets. The future of Russian machine-building. 11th All-Russian Conference of Young Scientists and Specialists (with international studies): collection of documents. Moscow, BMSTU Press, 2018, pp. 223–225. (In Russ.).

[14] Frolov V.A., Peshkov V.V., Kolomenskiy A.B., Kazakov V.A. Welding. An introduction to speciality. Moscow, Intermet Engineering Publ., 2004, pp. 291–293. (In Russ.).

[15] Fokin N.V., Kosmatsky Ya.I. Features of pressing bimetallic pipes. Current directions of scientific research: from Theory to Practice, 2015, no. 1 (3), pp. 263–264. (In Russ.).

[16] Danenko V.F., Gurevich L.M. Modeling of the process of drawing bimetallic wire carbon steel+12X18H10T with varying degrees of deformation. Modeling and Development of OMD processes, 2018, no. 27, pp. 3–10. (In Russ.).