Methods of control over twist drill diamond-like coating parameters

Authors: Tsisik O.I.
Published in issue: #4(4)/2016
DOI: 10.18698/2541-8009-2016-4-31
Category: Mechanical Engineering and Machine Science | Chapter: Inspection and Diagnostics in Mechanical Engineering
Keywords: diamond-like coating, control, nanoindentation
Published: 14.02.2017

We developed a method of control over diamond-like coating parameters. The method involves the analysis of the metrological characteristics, the choice of the optimal method for performance assessment. We carried out a number of measurements of the diamond-like sputtering on the check test piece and analyzed the errors that occur when running the nanoindenter.

References

[1] Komshin A.S., Syritskiy A.B. Metrological assurance of nanotechnology in the industrial conditions. Nanoinzheneriya [Nano Ingineering], 2014, no. 4, pp.14-19 (in Russ.).

[2] Golovin Yu.I. Nanoindentirovanie i ego vozmozhnosti [Nanoindentation and its capabilities]. Moscow, Mashinostroenie Publ., 2009. 312 p. (in Russ.).

[3] Wolf V., Richter A. The concept of differential hardness in depth sensing indentation. New. J. Phys., 2003, vol. 5. URL: http://iopscience.iop.org/article/10.1088/1367-2630/5/1/315 DOI: 10.1088/1367-2630/5/1/315

[4] Novikov N.V., Dub S.N., Mil’man Yu.V., Gridieva I.V., Chugunova S.I. Primenenie metoda nanoindentirovaniya dlya izucheniya fazovogo prevrashcheniya poluprovodnik-metall v kremnii. Sverkhtverdye materialy, 1996, pp. 36-45.

[5] Kogut L., Komvopoulos K. Analysis of the spherical indentation cycle for elastic perfectly plastic solids. J. Mater. Res., 2004, vol. 19, no. 12. URL: https://www.cambridge.org/core/journals/journal-of-materials-research/article/div-classtitleanalysis-of-the-spherical-indentation-cycle-for-elasticperfectly-plastic-solidsdiv/447A4D9FBBBCF0BF2F8985C7D3E794AC DOI: 10.1557/JMR.2004.0468

[6] ISO/FDIS 14577-1:2002. Metallic materials - instrumented indentation test for hardness and materials parameters. URL: http://www.iso.org/iso/home/store/catalogue_ics/catalogue_detail_ics.htm?csnumber=30104 (accessed 10.12.2016).

[7] Isaenkova M.G., Perlovich Yu.A., Golovin Yu.I. Ispol’zovanie nanoindentometra dlya otsenki mekhanicheskikh svoystv materialov: Laboratornyy praktikum [Using nanoindenter for assessment of material mechanical properties. Laboratory practicum]. Moscow, MEPHI Publ., 2008. 36 p. (in Russ.).