Modern powder metallurgy methods
Authors: Shumkov D.S. | Published: 20.10.2016 |
Published in issue: #2(2)/2016 | |
DOI: DOI: 10.18698/2541-8009-2016-2-15 | |
Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials | |
Keywords: powder metallurgy, molding, sintering |
Applicability of sonification methods in nanotube classification problems
Authors: Tyutin A.K., Kazakov V.V., Verstov V.A. | Published: 16.03.2017 |
Published in issue: #1(6)/2017 | |
DOI: DOI: 10.18698/2541-8009-2017-1-53 | |
Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials | |
Keywords: sonification, multimodal presentation of information, nanotechnology, nanotubes |
Specifics of surface phase formation during carburisation of ferrous alloys
Authors: Terezanova K.V., Cherenkova S.A. | Published: 30.03.2017 |
Published in issue: #2(7)/2017 | |
DOI: DOI: 10.18698/2541-8009-2017-2-62 | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: surface hardening, carburisation, diffusion saturation of surfaces, X-ray diffractometry method, ferrous alloys, phase structure of surface layers, sample hardening, X-ray phase analysis, surface property improvement |
Composite materials in civil engineering
Authors: Yakovlev R.V. | Published: 10.04.2017 |
Published in issue: #4(9)/2017 | |
DOI: DOI: 10.18698/2541-8009-2017-4-80 | |
Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials | |
Keywords: composite materials, manufacturing process, composite siding |
A model for gas permeability of a carbon fibre reinforced plastic composite material
Authors: Andreev R.O. | Published: 06.06.2017 |
Published in issue: #6(11)/2017 | |
DOI: DOI: 10.18698/2541-8009-2017-6-104 | |
Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials | |
Keywords: free molecular flow in gas, conductivity, capillary, vacuum, vacuum production process, gas permeability, composite material, carbon fibre reinforced plastic |
Application of carbon nanomodificators in composites
Authors: Prokhorova M.A. | Published: 28.06.2017 |
Published in issue: #7(12)/2017 | |
DOI: DOI: 10.18698/2541-8009-2017-7-128 | |
Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials | |
Keywords: composites, carbon nanotubes, strength properties of the material, performance properties of the material |
Experimental and theoretical study of surface phenomena in the process of interaction between the low-pressure hydrocarbonic atmospheres and ferroalloys
Authors: Korolev I.P. | Published: 04.10.2017 |
Published in issue: #10(15)/2017 | |
DOI: DOI: 10.18698/2541-8009-2017-10-180 | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: thermochemical treatment, carbonization, diffusion, low-pressure atmospheres, decarburization, atomistic modeling |
Mechanism of removing sulfur and phsophorus from molten steel U8 by filtration through foam ceramics
Authors: Stoyakina E.A., Degtyareva A.G. | Published: 29.11.2017 |
Published in issue: #12(17)/2017 | |
DOI: DOI: 10.18698/2541-8009-2017-12-216 | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: filtration, foam ceramics, macroscopic structure, modeling, hydraulic channel, adhesion |
Increasing the back-to-back endurance of the cog wheels made of steel 25Х13Н2
Authors: Ivanov I.M., Shebeshev K.I. | Published: 27.04.2018 |
Published in issue: #5(22)/2018 | |
DOI: DOI: 10.18698/2541-8009-2018-5-303 | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: cog wheels, steel 25Х13Н2, heat treatment procedure, back-to-back endurance, hardness, hardening, high-frequency current hardening, drawing |
Quasiperiodic change of microhardness during cyclic loading of structural steels
Authors: Bolotnikov A.I. | Published: 12.10.2018 |
Published in issue: #10(27)/2018 | |
DOI: DOI: 10.18698/2541-8009-2018-10-384 | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: microhardness, non-destructive testing, fatigue, microcracks, electrical resistance, eddy current, structural steels, strength |