Determining the roughness amplitude formed by ball burnishing
| Authors: Novichkov A.A. | Published: 26.04.2017 |
| Published in issue: #5(10)/2017 | |
| DOI: DOI: 10.18698/2541-8009-2017-5-99 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: burnishing, numerical experiment, resulting surface roughness, regression coefficient | |
Design and technological methods for increasing the performance of ultra-jet slurrying of liquid-phase structures
| Authors: Yakovlev R.V. | Published: 26.04.2017 |
| Published in issue: #5(10)/2017 | |
| DOI: DOI: 10.18698/2541-8009-2017-5-102 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: ultra-jet treatment, ultra-jet, design and technological solutions, liquid-phase structure, carbide target | |
Analysing possible uses of spindle units with hydrostatic bearings
| Authors: Aleksandrov Ya.V. | Published: 06.06.2017 |
| Published in issue: #6(11)/2017 | |
| DOI: DOI: 10.18698/2541-8009-2017-6-103 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science, Drive Systems, and Machine Components | |
| Keywords: spindle unit with hydrostatic bearings, high precision machine tool, plain bearing indicators, spindle bearing rigidity | |
Machine vision system for mobile robot navigation
| Authors: Ren Shufeng | Published: 06.06.2017 |
| Published in issue: #6(11)/2017 | |
| DOI: DOI: 10.18698/2541-8009-2017-6-109 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Robots, Mechatronics, and Robotic Systems | |
| Keywords: mobile robot, robot navigation, reference point, machine vision system, coordinate measurement error | |
System organization of proprietary technical service of processing engineering equipment
| Authors: Alekseev V.I. | Published: 28.06.2017 |
| Published in issue: #7(12)/2017 | |
| DOI: DOI: 10.18698/2541-8009-2017-7-117 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Inspection and Diagnostics in Mechanical Engineering | |
| Keywords: proprietary technical service, serviceability, reliability, maintenance and repair | |
Determination of working area and special positions of the plane parallel structure mechanism
| Authors: Boyunova E.M. | Published: 28.06.2017 |
| Published in issue: #7(12)/2017 | |
| DOI: DOI: 10.18698/2541-8009-2017-7-118 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science, Drive Systems, and Machine Components | |
| Keywords: special positions, singularities, working area, inverse kinematic problem, parallel structure mechanism, plane mechanism, modeling of mechanical systems, Jacobi matrix | |
Analysis of threaded joints for slewing bearings
| Authors: Zhanysbekova Zh.Zh. | Published: 28.06.2017 |
| Published in issue: #7(12)/2017 | |
| DOI: DOI: 10.18698/2541-8009-2017-7-119 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Processes | |
| Keywords: slewing bearing, screws, threaded joint, roughness parameter, compliance of the contact layer | |
One of the approaches to determining the gear burn-in period
| Authors: Korotkikh E.I. | Published: 28.06.2017 |
| Published in issue: #7(12)/2017 | |
| DOI: DOI: 10.18698/2541-8009-2017-7-124 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science, Drive Systems, and Machine Components | |
| Keywords: gear, burn-in period, critical crack size, reduction gearbox diagnostics, wheel tooth failure | |
Experimental study of characteristics of vibrocon sm height-adjustable props under varying loads with different frequencies
| Authors: Pyatakova M.A. | Published: 28.06.2017 |
| Published in issue: #7(12)/2017 | |
| DOI: DOI: 10.18698/2541-8009-2017-7-129 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Inspection and Diagnostics in Mechanical Engineering | |
| Keywords: props, rigidity tests, deformations | |
Two-axial wheeled vehicles motion stabilization through torque biasing between front and rear axes
| Authors: Eranosyan А.V. | Published: 28.06.2017 |
| Published in issue: #7(12)/2017 | |
| DOI: DOI: 10.18698/2541-8009-2017-7-135 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science, Drive Systems, and Machine Components | |
| Keywords: course stability, trajectory stability, dynamic stabilization system, torque biasing between axes | |